location_0_addressRegionName

location_0_addressCountryName

OFFSITE

UNKNOWN

jobPosting hiringOrganization as json hashed.

ADAPTED_NOW

Plant Operator/Technician

The Plant Operator is responsible for the safe and efficient operation and day to day routine maintenance of the Fort Simpson plant engines, associated auxiliary equipment, plant grounds and fences. Clears entrances/exits of snow and debris, sweeps and washes floors, inspects and services emergency lighting and exit signs to ensure buildings and property are maintained in a safe, clean manner.

ACTIVE

Overview:This position is located in Fort Simpson, NT (this position does require the successful candidate to reside in Fort Simpson; it is NOT a rotational/fly-in position) The Plant Operator is responsible for the safe and efficient operation and day to day routine maintenance of the Fort Simpson plant engines, associated auxiliary equipment, plant grounds and fences. To participate as a member of the Operations Group in determining department objectives andpriorities and to undertake cross training in other program areas as determined by the work group.Responsibilities:<ul><li>Always work safely, adhere to all aspects of the NTPC Health & Safety and Environmental programs, comply with all rules & regulations, and continually practice health & safety while performing any duties.</li><li>Starts and stops diesel engines as per operational requirements.</li><li>Synchronises and disconnects generators to and from system buss through manual operation and/or use of remote Programmable Logic Controller.</li><li>Monitors and operates units, plants, and auxiliary equipment as per operational requirements, and manufacturer's recommendations and completes required logs of readings.</li><li>Applies for, receives and interprets Work Protection Code applications.</li><li>Performs or assists with preventative maintenance and over-hauls on units, plants auxiliary equipment, transmission lines and sub-stations as per preventative maintenance schedule.</li><li>Prepares and monitors units, plants and equipment for standby condition.</li><li>Reviews and maintains plant log books.</li><li>Monitor, assist and report progress of outside contractors. Complete daily, weekly and monthly plant / unit reports.</li><li>Inspects and maintains tank farms, fuel transfer lines and pump houses, and fuel tank levels, and reports any unusual conditions immediately.</li><li>Clears entrances/exits of snow and debris, sweeps and washes floors, inspects and services emergency lighting and exit signs to ensure buildings and property are maintained in a safe, clean manner. </li><li>Assist in system restoration following a system disturbance manually restoring the system if necessary.</li><li>All other duties as required.</li></ul>Qualifications:<ul><li>High school diploma plus a minimum of one year related mechanical and/or electrical experience. Equivalencies may be considered.</li><li>A course in power engineering, building maintenance or electrical/mechanical would be considered an asset.</li><li>Ability to communicate effectively, both in writing and verbal form, as well as work with minimal supervision.</li><li>Ability to work in a team environment.</li><li>Knowledge of safety regulations and procedures, with a strong commitment to personal safety and safe working practices. </li><li>Must be able to deal with more than than one issue at a time, assign priorities to problems, and respond to phone calls.</li><li>This position requires freedom of movement and physical strength to handle heavy items in performing a variety of maintenance acitivities. Must also be comfortable working at height.</li><li>Full Class 5 driver's license is required.</li><li>Satisfactory criminal record check.</li></ul> This is a bargaining unit position. Salary for this position ranges from $42.96/hr to $52.18/hr, in addition to the location allowance of $6,184 per annum. We offer a comprehensive benefits package which includes health and dental benefits, long-term disability, life insurance, paid sick days and a defined benefits pension plan.  This position is located in Fort Simpson, NT. Relocation assisdtance may be provided.  Indigenous Employment Policy - Candidates must clearly identify eligibility status in order to receive priority consideration.We thank all those who apply and advise that only those selected for further consideration will be contacted.  PC4159

NORTHWEST TERRITORIES POWER CORPORATION

Plant Operator

[AW]-iCims

General Worker/Laborer

Overview:Are you ready to embark on an exciting journey with Morgan Construction where you’ll play a pivotal role in the dynamic world of heavy civil construction? Comprehensive Benefits: Enrollment in our comprehensive hour bank benefits plan, including extended health, dental, and life insurance.

Overview:Are you ready to embark on an exciting journey with Morgan Construction where you’ll play a pivotal role in the dynamic world of heavy civil construction? Our team is made up of experts in their fields, we move the earth - and we love it! At Morgan, we don’t just build projects; we build careers and futures. Join us as a Skilled Demolition Labourer and be a part of our commitment to our values and pillars of excellence. Morgan Construction and Environmental Ltd. is a well-established and respected heavy civil contractor that operates throughout Canada. Our company is committed to the excellence of our work, and workplace safety and building trust with our clients. We believe in our people and trust that they are the backbone of our success. Why Choose Morgan Construction?<ul style="margin-top:0cm"><li>Competitive Compensation: We offer industry-leading wages, making your dedication even more rewarding.</li><li>Comprehensive Benefits: Enrollment in our comprehensive hour bank benefits plan, including extended health, dental, and life insurance.</li><li>Stability and Growth: Benefit from continuous year-round work and opportunities for career development and training.</li></ul>Responsibilities:Job Duties and Responsibilities This Project scope requires the worker to be comfortable with flying in helicopters and working in a very remote location.<ul style="margin-top:0cm"><li style="list-style-type:disc">Tasks may include hand demolition, breaking materials into panels, measuring, cutting and pulling apart structures. Carrying, stacking and loading materials, receiving long line debris from a helicopter.</li><li style="list-style-type:disc">Demonstrates good judgment and problem-solving skills.</li><li style="list-style-type:disc">Knowing job procedures and if in doubt know where to locate written work procedures.</li><li style="list-style-type:disc">Performing work with co-workers in a safe, responsible, and cooperative manner.</li><li style="list-style-type:disc">Performing any other duty or task as may be assigned from time to time by the Supervisor and/or Supervisor.</li></ul>Qualifications:Qualifications<ul style="margin-top:0cm"><li style="list-style-type:disc">Must have at least 2 years of experience as a labourer in the demolition industry. Proven experience with demolition activities.</li><li style="list-style-type:disc">Torch cutting experience would be preferred.</li><li style="list-style-type:disc">Familiar with demolition hand tools.</li><li style="list-style-type:disc">Asbestos abatement experience would be an asset</li><li style="list-style-type:disc">Able to identify hazards on sites and complete JSA’s and hazard assessments.</li><li>Strong understanding of safety protocols and procedures.</li></ul>Requirements<ul style="margin-top:0cm"><li>Alcohol, Drug and Fit to Work testing is a pre-employment requirement.</li><li>Able to repetitively and safely lift up to 50lbs.</li><li>Must have valid Class 5 license and clean drivers abstract</li><li>Must have (or be willing and able to obtain) Intermediate First Aid and WHMIS</li><li>Provide your own CSA Approved safety boots that are a minimum of 6" high and fully laceable.</li></ul>Working Conditions<ul style="margin-top:0cm"><li>Embrace the elements by working outdoors in all weather conditions. Whether it's rain, shine, or snow, you'll need to thrive in diverse weather environments.</li><li>Expect to handle noise and vibrations on the job.</li><li>Must be able to work up to 12 hours a day.</li><li>Must be able to work day or night shifts.</li><li>With a willingness to work in remote areas, you will experience a truly unique lifestyle on a rotational schedule, with accommodation provided.</li></ul>#mcelpw

Morgan Construction & Environmental Ltd

Skilled Demolition Labourer

INTEGRATED

YEAR

Machinist

This opportunity includes an industry competitive pay rate, daily overtime, 12 hours workdays, an even ‘days in’ and ‘days off’ work schedule; full access to on-site room and board including fitness and recreational amenities; paid flights, hotels, meals from the closest major airport to and from the jobsite; health benefits, and more. David Aplin & Associates Inc., operating as Aplin, and its associated brands, CompuStaff and Impact Recruitment, is an award-winning employment agency connecting diverse, top-tier talent with exceptional organizations across North America.

Experience the ruggedness and raw beauty of Canada’s far North while enjoying the fly-in fly-out lifestyle. Join Canada’s leading gold producer as they expand an impressive and ever-increasing footprint across the Canadian arctic. Scope of work includes the machining of industrial parts to specifications using machining tools such as lathes, milling machines, grinders etc. Five years’ experience in the mining sector and Red Seal Certification are required. Applicants with remote mine site experience will be given hiring preference. This opportunity includes an industry competitive pay rate, daily overtime, 12 hours workdays, an even ‘days in’ and ‘days off’ work schedule; full access to on-site room and board including fitness and recreational amenities; paid flights, hotels, meals from the closest major airport to and from the jobsite; health benefits, and more.   This opportunity is available to candidates in Edmonton, Calgary, Regina, Saskatoon, Winnipeg, Toronto, Montreal, and Vancouver. If you're interested in this opportunity, please email your resume to trades@aplin.com. David Aplin & Associates Inc., operating as Aplin, and its associated brands, CompuStaff and Impact Recruitment, is an award-winning employment agency connecting diverse, top-tier talent with exceptional organizations across North America. We welcome applicants from all backgrounds and charge no fees to apply or engage with our recruiters. Our clients partner with us to help expand and diversify their teams. Please note that all applicants must be legally entitled to work in Canada, including holding any necessary work permits.

Aplin

Machinist (Arctic Fly-in Fly-out, Mining, Maintenance)

idibu

Plant Superintendent

In a team environment, under the general supervision and direction of the Manager, Generation Support, Deh Cho/Sahtu the plant superintendent is responsible for the day-to­ day operation/ routine plant maintenance and operations, maintenance of the associated auxiliary equipment, and minor maintenance of the distribution facilities and ensure the safe, efficient and reliable supply of electricity to the community. Maintains a clean and safe work environment in the performance of work, maintains all tools, equipment, and vehicles in good working condition, and ensures compliance to all safety programs, health and safety legislation, and Corporation Safety Rules in the completion of work activities.

Overview:This is a PART-TIME position located in Nahanni Butte, NT. This is NOT a rotational/fly-in position and the successful candidate must live in Nahanni Butte. In a team environment, under the general supervision and direction of the Manager, Generation Support, Deh Cho/Sahtu the plant superintendent is responsible for the day-to­ day operation/ routine plant maintenance and operations, maintenance of the associated auxiliary equipment, and minor maintenance of the distribution facilities and ensure the safe, efficient and reliable supply of electricity to the community. <ul><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:#424242">Working environment is primarily in a diesel generating plant. Work performed requires safety precautions and to wear the appropriate personal protective equipment and clothing (hard hat, hearing protection, safety footwear, eye protection, etc.). The incumbent is exposed to risks and extremes in weather conditions and temperature. Job involves isolation and residing in remote areas. Required to work alone and be able to ask for help as required.</li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:#424242">Will be required to be ON STAND-BY for extended periods of time as the sole resource within a remote community.</li><li>Working aloft with the use of a ladder is required to complete work. Should not be afraid of heights.</li></ul>Responsibilities:<ul style="direction:ltr;unicode-bidi:embed;margin-top:0in;margin-bottom:0in"><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Always work safely, adhere to all aspects of the NTPC Health & Safety and Environmental programs, comply with all rules & regulations, and continually practice health & safety while performing any duties. </li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Ensure the safety of other employees, contractors and the general public in the workplace by:</li><li><ul style="direction:ltr;unicode-bidi:embed;margin-top:0in;margin-bottom:0in"><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Reporting any failure to adhere to safety practises or rules</li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Providing detailed orientations and identification of hazards to all visitors</li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Removing hazards or make the workplace safe when leaving a work area</li></ul></li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Participate in the continuous improvement of the Health & Safety program, Environment program as well as NTPC’s safety culture.</li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Operates and maintains power generation equipment and facilities in accordance with corporate procedures, performs daily plant inspections and reports, and ensures that routine and emergency repairs and maintenance are completed in a timely and efficient </li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Supervises and directs the activities of casual staff including hiring, site and safety orientation, assigning duties, supervising the completion of work. </li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Maintains a clean and safe work environment in the performance of work, maintains all tools, equipment, and vehicles in good working condition, and ensures compliance to all safety programs, health and safety legislation, and Corporation Safety Rules in the completion of work activities.</li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">Available to respond to emergency or corrective events within the community on a regular basis. This includes being within cell phone range and fit for duty while on stand-by. </li><li style="margin-top:0;margin-bottom:0;vertical-align:middle;color:black">All other duties as required.</li></ul>Qualifications:<ul style="margin-top:0in;margin-bottom:0in"><li style="margin-top:0;margin-bottom:0">High School diploma (or equivalent) plus at least one year of related mechanical/electrical or power generation experience. Equivalencies may be considered. </li><li style="margin-top:0;margin-bottom:0"> Related journeyperson certification would be an asset.</li><li style="margin-top:0;margin-bottom:0">Ability to work in a team environment with minimum direct supervision in a location remote from the regional office. </li><li style="margin-top:0;margin-bottom:0">Good oral and written communication skills to maintain effective, open, and reliable communications with team members, customers, and community representatives.</li><li style="margin-top:0;margin-bottom:0">Administrative, supervisory, and organizational skills to manage multiple tasks and assignments, direct the work of staff, and to provide documentation, reports, and recommendations to the regional office.</li><li style="margin-top:0;margin-bottom:0">Excellent knowledge of safety regulations and procedures.</li><li style="margin-top:0;margin-bottom:0">Computer skills to operate a variety of software related to financial, administrative and reporting systems, email, internet, etc.</li><li style="margin-top:0;margin-bottom:0">First Aid and CPR certification is an asset.</li><li style="margin-top:0;margin-bottom:0">Must have a full Class 5 NWT driver’s license.</li><li style="margin-top:0;margin-bottom:0">Must provide satisfactory criminal record check.</li></ul> This is a part-time position (30 hours/week). Salary for this position ranges from $42.96/hr. to $52.18hr. plus approximately $11,464 in location allowance per annum. We offer a comprehensive benefits package which includes health and dental benefits, disability insurance, life insurance, paid sick days and a defined benefits pension plan. Relocation assistance may be provided. This position is located in Nahanni Butte, NT -- this is not a rotational/fly-in position. Indigenous Employment Policy - Candidates must clearly identify eligibility status in order to receive priority consideration.We thank all those who apply and advise that only those selected for further consideration will be contacted. PC4153

Plant Superintendent - Part Time, Nahanni Butte

Electrical Engineer

To provide electrical design, engineering, and project management services from the conceptual stage through to commissioning for capital projects and operational support involving the Corporation's generating stations and transmission and distribution systems. Prepares preliminary and final detailed designs for the electrical and automation systems associated with the Corporation's diesel, hydro-electric, and renewable generating stations, as well as transmission and distribution substations.

Overview:This position is located in Hay River, NT (on-site, NOT remote) To provide electrical design, engineering, and project management services from the conceptual stage through to commissioning for capital projects and operational support involving the Corporation's generating stations and transmission and distribution systems. The incumbent will be required to perform the following tasks with minimal supervision:Responsibilities:<ul><li>Always work safely, adhere to all aspects of the NTPC Health & Safety and Environmental programs, comply with all rules & regulations, and continually practice health & safety while performing any duties.</li><li>Prepares preliminary and final detailed designs for the electrical and automation systems associated with the Corporation's diesel, hydro-electric, and renewable generating stations, as well as transmission and distribution substations. These systems include generators, transformers, switchgear, plant automation, auxiliary electrical apparatus, control systems, and protective relaying systems. Designs shall be practical, economical, and meet or exceed the latest edition of all applicable codes, standards, and regulations.</li><li>Performs tender evaluations and provides recommendations for contract award. Carries out administration of contract on equipment and construction. Initiates purchase, processes progress and processes final payment claims for further review and approval.</li><li>Performs on-site construction supervision, prepares detailed, project-specific electrical commissioning procedures and carries out or witnesses, as appropriate, the commissioning of electrical and automation systems.</li><li>Supports Hydro and Thermal Operations as requested to resolve complex electrical issues and to assist with investigations, outage analysis, restoration and emergency field repairs.</li><li>Participates in the development of corporate technical standards, procedures and policies.</li><li>Other dutires as required.</li></ul>Qualifications:<ul><li>Bachelor's (or Master’s) degree in Electrical Engineering with a minimum of six years related experience in a utility or industrial setting with Electrical / Automation / Protection / and Controls.Preferably five years of electrical utility experience of which two are directly related to thermal and/or hydroelectric power generation. Equivalencies may be considered.</li><li>Registered with NAPEG in NWT or other Professional Engineering association in other Provinces of Canada. If registered as P. Eng outside of NWT, individual must be eligible to be registered with NAPEG as P.Eng.  </li><li>Accomplished computer skills and ability to apply electrical analysis / design software.</li><li>Excellent English communication and writing skills.</li><li>Ability to work alone, in a team environment, and independently with minimal supervision.</li><li>Above average interpersonal skills and ability to work in a functional team environment.</li><li>Strong consultation, organization, and time management skills to ensure work is appropriately prioritized.</li><li>Willing and able to travel throughout the Territory.</li><li>Class 5 driver's license.</li><li>Successful completion of a Criminal Records Check will be required.</li><li>Must be eligible to work/live in Canada (NWT) without sponsorship.</li></ul> This is a bargaining unit position. Salary for this position ranges from $66.22/hour - $80.48/hour plus location allowance of approximately $3,823 per annum. We offer a comprehensive benefits package which includes health and dental benefits, long-term disability, life insurance, paid sick days and a defined benefits pension plan. This position is located in Hay River, NT, and does require the successful candidate to reside/relocate here. Relocation assistance may be provided.  Indigenous Employment Policy - Candidates must clearly identify eligibility status via the online portal application process in order to receive priority consideration.We thank all those who apply and advise that only those selected for further consideration will be contacted. PC4074

Remote jobs are available on Monster! Insurance managers are hiring in Northwest Territories! Upload your resume and supercharge your job search.

Remote Insurance Jobs in Northwest Territories

NORTHWEST TERRITORIES POWER CORPORATION

Morgan Construction & Environmental Ltd

Aplin

NORTHWEST TERRITORIES POWER CORPORATION

NORTHWEST TERRITORIES POWER CORPORATION